Home Design Solutions

Most of us know well what linoleum floor is. Based on linseed oil, ground limestone and resin, is a durable material available in sheet and tile. Sheet products are a preferred alternative as the tiles are prone to warping and curled edges. The linoleum floor installation is a challenge and is best done by a professional.

Linoleum cured is resistant to scratches, stains and heat. With proper care and maintenance, you can enjoy a shiny floor for over 30 years.

Like any floor, the linoleum is worn material over time.

If you are planning to replace a worn linoleum, or just want a new floor material, removing linoleum is a required step. Contrary to the installation, removal of linoleum flooring can make your own.

How to remove linoleum?

The worst part with old linoleum floor is sticking firmly to the underlying soil with age. Therefore, remove without damaging the basement is not so simple, especially if it is a wood material.

But if you have a little time and basic knowledge of soils, you can definitely try removing linoleum floor by yourself. Thus, the cost of removing the linoleum reaches the minimum. Discussed below is the procedure step by step, in connection with the removal of linoleum:

Tools and Supplies

Before you start directly with the removal of linoleum, gather the supplies required, such as knife, saw, circular saw, scraper, extractor soil and hot air gun (or hot). Also, do not forget to wear gloves and goggles in hand while enjoying the proposed elimination of linoleum.

Decide a starting point

If it is linoleum tile removal, pay attention to any damaged or loose tiles. This will serve your starting point for the removal of linoleum. Place a floor scraper beneath the tile and try to boot. In the case of the sheet, you have no option other than the machine that strips of 6.8 inches, using a sharp knife.

Concrete subfloor

Linoleum underlying bonds weakly with concrete floor, and it does not absorb the glue. Therefore, removing the linoleum floor of a concrete subfloor requires minimal effort. What we can do is pour hot water carefully over the linoleum blade and wait for a few minutes. The water loosens the glue, after which they can be easily removed. Use a floor scraper and scrape the tail as possible.

Subfloor file

If linoleum floor with a wood subfloor, first make sure the underlying layer. If plywood, consider removing the linoleum and plywood together, using a heat gun.

Otherwise, hardwood flooring, you should cut the sheet of linoleum in a specific direction (preferably along the grain of wood) for easy removal. After that, smooth the glue with a heat gun and immediately remove the linoleum. You can cover a small area at a time and remove the glue with a scraper.

Therefore, this was all some basic tips for removing linoleum. For any project of home improvement, understanding and proper planning are the golden rules to achieve perfect results. The same applies to the removal of linoleum floors on its own. Once finished with the removal of linoleum floor, prepare the soil surface for new flooring

Possibility Related Posts:

• How do linoleum floor maintenance