Creating a new system to change the look of faucets
Change an old faucet (the key) for a model mixer with included cap is much easier than you think. First, you have to remove the drain trap and disconnect the hoses from attack, so you can remove the old faucet of your site, then put the new system.
Tips to change a faucet
1. Before starting work, do not forget to close the valve and place a bucket under the sink. The models built plug tap is very useful, and avoid having the cap over the sink with the usual chain. You only need a touch of a lever to set.
2 Shut off the tails of attack, loose, loose bolts with a spanner. Bring out the valves on the wall.
3 Place the new valves for connections with the wrench, before wrapping the threads with Teflon tape or esparto.
4 Set the new drain valve with a wrench eccentric. The valve stem also has to adjust the cap on the sink.
5 Cut the hose connection to hot and cold water to measure, and connect to the new valve with the wrench.
6 Install the boom pivots to close the cap and mount the new trap by adjusting the height of the tube, you have to cut to dock.
Posted in 
Tags: